SN74CBTLV3245APWG4

SN74CBTLV3245APWG4 Overview

Providing this information in the TSSOP enables digital switch board space to be saved.The basic configuration of this system includes 20 terminations.The turn signal switch is supplied with a voltage of 2.5V volts.A component pin count of 20 is found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.This supply type employs Single.Currently, it is configured with 20 pins.The mounting is in the way of Surface Mount.There is a family of CBTLV/3B members.In this signal multiplexer, there are 8 bits provided.Part number Bus Driver/Transceivers indicates that the digital switch ic is an electronic part.In the absence of external influences, it consumes 20μA current of multiplexer ic.Using a supply voltage of 3.3V can result in reliable performance of the multiplexers.2 ports are used for some other peripheral signal switchings to plug in.A resistance of 7Ohm is used to operate it.The signal switch can operate at a maximum temperature of 85°C.In order to maintain a minimal operating temperature, the temperature of the multiplexer should be set to -40°C.The relevant device specification specifies a maximum supply voltage of 3.6V for the signal switches.In compliance with the applicable device specification, the digital swith operates at a minimum supply voltage of 2.3V.It employs BUS DRIVER as its logic IC.

SN74CBTLV3245APWG4 Features

Supplied in the TSSOP package
Adopting a supply type of Single
Operating with the supply voltage of 3.3V
BUS DRIVER as the logic IC

SN74CBTLV3245APWG4 Applications

There are a lot of Texas Instruments SN74CBTLV3245APWG4 Signal Switches / Multiplexers / Decoders applications.

• Solenoid cooling fan
• Data distribution
• To select different devices in microprocessor output
• Code converters
• Night vision cameras
• RF-based home automation system
• Automatic health monitoring systems
• Speed control of medern motors
• Code conversion
• Memory system of computers