SN74F109D

SN74F109D Overview

It is packaged in the way of 16-SOIC (0.154, 3.90mm Width). There is an embedded version in the package Tube. In the configuration, Differentialis used as the output. This trigger is configured to use Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. The operating temperature is 0°C~70°C TA. It is an electronic flip flop with the type JK Type. In FPGA terms, D flip flop is a type of 74Fseries FPGA. Its output frequency should not exceed 150MHz. T flip flop consumes 17mA quiescent energy. A total of 16 terminations have been made. If you search by 74F109, you will find similar parts. A voltage of 5V provides power to the D latch. The electronic device belongs to the F/FASTfamily. Surface Mount mounts this electronic component. This board has 16 pins. This device has the clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. Its flexibility is enhanced by 2 circuits. The system runs on a power supply of 5V watts. For high efficiency, the supply voltage should be kept at 5V. With an output current of 20mA, this device offers maximum design flexibility.

SN74F109D Features

Tube package
74F series
16 pins
5V power supplies

SN74F109D Applications

There are a lot of Texas Instruments SN74F109D Flip Flops applications.

• Patented noise
• Balanced 24 mA output drivers
• Automotive
• High Performance Logic for test systems
• Frequency Dividers
• Registers
• Memory
• ATE
• Convert a momentary switch to a toggle switch
• Computers