SN74F109DRE4

SN74F109DRE4 Overview

The item is packaged in SOICcases. It is included in the package Tape & Reel (TR). T flip flop uses TTLas the output. A total of 2elements are contained within it. Terminations are 16. A voltage of 5V is used as the power supply for this D latch. Devices in the F/FASTfamily are electronic devices. A part of the electronic system is mounted in the way of Surface Mount. 16pins are included in its design. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. It is designed with a number of bits of 2. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. A power supply of 5Vis required to operate it. Optimal efficiency requires a supply voltage of 5V. It is designed with 1 output lines. -1mAis set as the high level output current. It is set to 20mAfor the low level output current. It is recommended that the operating temperature be lower than 70°C. If the operating temperature is higher than 0°C, the system should operate properly. It is powered by 4.5V as its minimum supply voltage. A maximum voltage of 5.5V can be provided by it. It is possible to obtain a frequency of 150MHz. J-KBAR FLIP-FLOPis the logic IC it uses. Currently, it is equipped with 2 functions . With 16 pins, it is equipped with a low power consumption. 20mA provides maximum design flexibility due to its output current.

SN74F109DRE4 Features

Tape & Reel (TR) package
16 pins
2 Bits
5V power supplies
2 Functions
16 pin count

SN74F109DRE4 Applications

There are a lot of Texas Instruments SN74F109DRE4 Flip Flops applications.

• CMOS Process
• EMI reduction circuitry
• Digital electronics systems
• Supports Live Insertion
• Parallel data storage
• Count Modes
• Latch-up performance
• Data storage
• Modulo – n – counter
• Buffered Clock