SN74F174AN

SN74F174AN Overview

It is embeded in 16-DIP (0.300, 7.62mm) case. Package Tubeembeds it. T flip flop is configured with an output of Non-Inverted. Positive Edgeis the trigger it is configured with. Through Holeis occupied by this electronic component. With a supply voltage of 4.5V~5.5V volts, it operates. It is operating at 0°C~70°C TA. This logic flip flop is classified as type D-Type. In FPGA terms, D flip flop is a type of 74Fseries FPGA. In order for it to function properly, its output frequency should not exceed 140MHz. In total, it contains 1 elements. It consumes 45mA of quiescent There are 16 terminations,The 74F174family includes it. An input voltage of 5Vpowers the D latch. Electronic devices of this type belong to the F/FASTfamily. There is an electronic part mounted in the way of Through Hole. It is designed with 16 pins. This device has the clock edge trigger type of Positive Edge. The part is included in FF/Latches. It is designed with a number of bits of 6. Due to its superior flexibility, it uses 7 circuits. A total of 5V power supplies are needed to run it. In order to ensure high efficiency, the supply voltage should remain at 5V. Featuring the maximum design flexibility, it has an output current of 20mA . The JK flip flop is with 6 output lines to operate.

SN74F174AN Features

Tube package
74F series
16 pins
6 Bits
5V power supplies

SN74F174AN Applications

There are a lot of Texas Instruments SN74F174AN Flip Flops applications.

• Counters
• High Performance Logic for test systems
• Pattern generators
• Supports Live Insertion
• Modulo – n – counter
• Data storage
• Clock pulse
• EMI reduction circuitry
• Power down protection
• Memory