SN74F2373DW

SN74F2373DW Overview

In the package 20-SOIC (0.295, 7.50mm Width), it can be found. It is packaged in the way of Tube. In its configuration, Tri-State is used as the output. D-Type Transparent Latch is the logic type of this electrical device. Electronic parts are mounted in accordance with Surface Mount. A 4.5V~5.5V supply voltage is required to operate it. There is 0°C~70°C operating temperature. In the 74F series, this FPGA is located. The electronic part in this image has 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This type belongs to the 74F2373 family. With a supply voltage of 5V, it operates. The 20 pind are equipped with it. F/FAST is the family of this electronic device. In addition, it is designed with a pin number of 20. This electronic part is mounted in the way of Surface Mount. This device has a total of 2 ports. In the subcategory FF/Latches, this part belongs. There are 5V power supplies attached to it. With an output current of 12mA, it is highly flexible in terms of design. A high level of efficiency is achieved by maintaining the supply voltage at 5V. There are 8 output lines that correspond to the binary equivalents of the input line. In total, it has 1 elements.

SN74F2373DW Features

20-SOIC (0.295, 7.50mm Width) package
74F series
8 Bits
74F2373 family
20 pin count
20 pins
5V power supplies
1 elements

SN74F2373DW Applications

There are a lot of Texas Instruments SN74F2373DW Latches applications.

• A/D converters
• Decade counting 7-segment decimal display
• Pattern Generators
• Four-bit storage with output enable
• Ring counter
• Shift right register
• Hammer Device Information
• Flip-flops
• Serial Output Data Queuing
• Counting