SN74F573DWR

SN74F573DWR Overview

The package in which it is embedded is named 20-SOIC (0.295, 7.50mm Width). Packaged in the way of Cut Tape (CT). It uses the output configuration Tri-State. There is D-Type Transparent Latch logic type for this electrical device. Electronic components are mounted using the Surface Mount method. A 4.5V~5.5V supply voltage is required to operate it. During operation, the temperature is set at 0°C~70°C. An FPGA in this series belongs to the 74F family. The electronic part in this image has 8 bits. A device with this design has 20 terminations. It belongs to 74F573 family. In order to function, the supply voltage should be set to 5V. With 20 pins, it is equipped. This electronic device is categorized as a F/FAST electronic device. The 20 pins are designed into it. Electronic parts are mounted using the Surface Mount method. This device has 2 ports that can be connected to it. Subcategory FF/Latches contains this part. It operates from 5V power supplies. In the circuit, there are 8 input lines that are constituted by an electronic circuit. As a result of its reliable performance, it is well suited for TR. It features maximum flexibility in design due to 24mA output current. High efficiency requires maintaining the supply voltage at 5V. The current consumed by the device is 38mA volts in quiescent mode, which cannot be affected by external factors. There is also BROADSIDE VERSION OF 373 characteristics to it. During operation, the maximum power current (ICC) that can be supplied for it to operate is set to 55mA.

SN74F573DWR Features

20-SOIC (0.295, 7.50mm Width) package
74F series
8 Bits
74F573 family
20 pin count
20 pins
5V power supplies

SN74F573DWR Applications

There are a lot of Texas Instruments SN74F573DWR Latches applications.

• Phase comparator
• Frequency
• Accumulator Registers
• Sample and hold register
• Shift right with parallel loading
• Motor Drives
• Multi-line decoders
• Relay replacement
• Automotive ADAS
• Parallel data storage