SN74F574DW

SN74F574DW Overview

It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). Package Tubeembeds it. T flip flop uses Tri-State, Non-Invertedas its output configuration. This trigger uses the value Positive Edge. It is mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis used as the supply voltage. Currently, the operating temperature is 0°C~70°C TA. There is D-Type type of electronic flip flop associated with this device. In this case, it is a type of FPGA belonging to the 74F series. A frequency of 100MHzshould not be exceeded by its output. A total of 1 elements are present. The number of terminations is 20. D latch belongs to the 74F574 family. A voltage of 5V provides power to the D latch. F/FASTis the family of this D flip flop. This electronic part is mounted in the way of Surface Mount. This board is designed with 20pins on it. This device's clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. There are 8bits in its design. To achieve this superior flexibility, 8 circuits are used. The power supply is 5V. A total of 2ports are embedded in the D flip flop. If high efficiency is desired, the supply voltage should be kept at 5V. Featuring the maximum design flexibility, it has an output current of 24mA . There are 3 output lines in this JK flip flop.

SN74F574DW Features

Tube package
74F series
20 pins
8 Bits
5V power supplies

SN74F574DW Applications

There are a lot of Texas Instruments SN74F574DW Flip Flops applications.

• Functionally equivalent to the MC10/100EL29
• Digital electronics systems
• Circuit Design
• Asynchronous counter
• Cold spare funcion
• Shift registers
• Individual Asynchronous Resets
• Storage Registers
• EMI reduction circuitry
• ESD protection