SN74F74N

SN74F74N Overview

In the form of 14-DIP (0.300, 7.62mm), it has been packaged. It is included in the package Tube. Differentialis the output configured for it. There is a trigger configured with Positive Edge. There is an electric part mounted in the way of Through Hole. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. Currently, the operating temperature is 0°C~70°C TA. This logic flip flop is classified as type D-Type. The 74Fseries comprises this type of FPGA. You should not exceed 145MHzin its output frequency. There is 16mA quiescent consumption. A total of 14terminations have been recorded. The 74F74 family contains it. A voltage of 5V is used as the power supply for this D latch. In terms of electronic devices, this device belongs to the F/FASTfamily of devices. There is an electronic part that is mounted in the way of Through Hole. With its 14pins, it is designed to work with most electronic flip flops. Its clock edge trigger type is Positive Edge. It is included in FF/Latches. The D latch runs on a voltage of 5V volts. In order to ensure high efficiency, the supply voltage should remain at 5V. As a result of its output current of 20mA, it is very flexible in terms of design. In order for the chip to function, it has 3output lines. It is of 2 channels.

SN74F74N Features

Tube package
74F series
14 pins
5V power supplies

SN74F74N Applications

There are a lot of Texas Instruments SN74F74N Flip Flops applications.

• Clock pulse
• Set-reset capability
• Supports Live Insertion
• Divide a clock signal by 2 or 4
• ESCC
• Control circuits
• Count Modes
• Single Down Count-Control Line
• Registers
• Data Synchronizers