SN74F74NSR

SN74F74NSR Overview

The item is packaged in 14-SOIC (0.209, 5.30mm Width)cases. You can find it in the Tape & Reel (TR)package. T flip flop uses Differentialas its output configuration. JK flip flop uses Positive Edgeas the trigger. There is an electrical part that is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. In this case, the operating temperature is 0°C~70°C TA. Logic flip flops of this type are classified as D-Type. JK flip flop is a part of the 74Fseries of FPGAs. Its output frequency should not exceed 145MHz. There is 16mA quiescent consumption. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This D latch belongs to the family of 74F74. A voltage of 5V provides power to the D latch. It belongs to the family of electronic devices known as F/FAST. This electronic part is mounted in the way of Surface Mount. 14pins are included in its design. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. 2 circuits are used to achieve its superior flexibility. As a result of its reliability, this D flip flop is ideally suited for TR. The D latch operates on 5V volts. If high efficiency is desired, the supply voltage should be kept at 5V. The output current of 20mA makes it feature maximum design flexibility. It is designed with 3 output lines.

SN74F74NSR Features

Tape & Reel (TR) package
74F series
14 pins
5V power supplies

SN74F74NSR Applications

There are a lot of Texas Instruments SN74F74NSR Flip Flops applications.

• Convert a momentary switch to a toggle switch
• Common Clocks
• Divide a clock signal by 2 or 4
• Storage Registers
• Test & Measurement
• Frequency Divider circuits
• QML qualified product
• Data Synchronizers
• Communications
• Storage registers