SN74HC05DRG4

SN74HC05DRG4 Overview

Packed in 14-SOIC (0.154, 3.90mm Width), the part is convenient for shipping overseas. In order to provide high reliability, an advanced packaging method Tape & Reel (TR) is used. This logic works according to the Inverter principle. It is necessary to ensure the full functionality of the part by providing a voltage of 2V~6V. The operating temperature is extended to around -40°C~85°C. There is Surface Mount mounting in Surface Mount. Current output is - 5.2mA in both the high and low states. The 74HC series contains it. In total, there are 14 terminations. There are 6 features that significantly enhance the user experience. The chip is a part of HC/UH. Try searching with 74HC05 if you're looking for device variants. 14 pins are injected into the part body. There are a number of applications for logic devices mounted with the Surface Mount pin. To find out what the 14 pins do, please refer to the datasheets. Quiescent parts carry 2μA current. The logic device shown here is a typical Gate. The part bears a load capacitance of 50pF. It requires a minimal voltage of 2V to supply the device. In this case, Vsup reaches its maximum value. A method of industry TR is included in the package. Device output current is 5.2mA. Typical operating voltages for the chip are specified as being z volts when it is first manufactured. In addition, it has Open Drain. By its 6 channels, the part provides high quality logic output.

SN74HC05DRG4 Features

Inverter Logic Type
Operating Temperature: -40°C~85°C
HC/UH Family
Quiescent Current: 2μA
Output Current: 5.2mA

SN74HC05DRG4 Applications

There are a lot of Texas Instruments SN74HC05DRG4 Gates and Inverters applications.

• Cell phone
• Island protection
• Mobile caravan
• Grid adaptation function
• Small and medium distributed photovoltaic power generation system
• Agriculture and light complementary power station
• Air conditioner
• Solar energy generation
• Hair dryer
• VCR