SN74HC109DT

SN74HC109DT Overview

In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. As part of the package Tape & Reel (TR), it is embedded. As configured, the output uses Differential. This trigger is configured to use Positive Edge. Surface Mountis in the way of this electric part. A voltage of 2V~6Vis used as the supply voltage. In the operating environment, the temperature is -40°C~85°C TA. This logic flip flop is classified as type JK Type. This type of FPGA is a part of the 74HC series. You should not exceed 60MHzin the output frequency of the device. There is a consumption of 4μAof quiescent energy. Currently, there are 16 terminations. It is a member of the 74HC109 family. Power is provided by a 5V supply. Its input capacitance is 3pFfarads. An electronic device belonging to the family HC/UHcan be found here. In this case, the electronic component is mounted in the way of Surface Mount. It is designed with 16 pins. This device exhibits a clock edge trigger type of Positive Edge. This part is included in FF/Latches. As soon as 6Vis reached, Vsup reaches its maximum value. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. Its flexibility is enhanced by 2 circuits. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. In order to achieve high efficiency, the supply voltage should be maintained at 5V. As a result of its output current of 5.2mA, it is very flexible in terms of design. It has 3 output lines to operate. In addition, you can refer to the additinal DUMMY VAL of the D latch.

SN74HC109DT Features

Tape & Reel (TR) package
74HC series
16 pins

SN74HC109DT Applications

There are a lot of Texas Instruments SN74HC109DT Flip Flops applications.

• Patented noise
• Count Modes
• Shift registers
• Balanced 24 mA output drivers
• Clock pulse
• Balanced Propagation Delays
• Memory
• Data Synchronizers
• Counters
• Registers