SN74HC132DBR

SN74HC132DBR Overview

The part is convenient to ship overseas because it is packed in a 14-SSOP (0.209, 5.30mm Width). A high level of reliability can be achieved through the use of an advanced packaging method Cut Tape (CT). A NAND Gate logic principle governs its operation. To ensure the part's full function, a voltage of 2V~6V is needed. An extended operating temperature of -40°C~85°C degrees Celsius. There is Surface Mount mounting in Surface Mount. In both high and low states, output current is 5.2mA 5.2mA. The number 74HC refers to it. The total number of terminations is 14. User experience is significantly enhanced by the part's 4 functions. The chip is a part of HC/UH. If you are looking for device variants, try search with 74HC132. A total of 14 pins are injected into the body of the part. It is widely used in a variety of applications due to its Surface Mount mounting. The datasheets for the 14 pins explain the functions. 2 inputs are supported by the part. In the quiescent state, the part has 2μA current flowing through it. In this logic device, the value is Gates. 50pF is the load capacitance of the part. Devices require a voltage of 2V to be powered. In this case, Vsup reaches its maximum value. There is a method TR in it that is designed for the industry. A device with an output current of 5.2mA is rated. The device has 1 outputs. For operation, there are 4 elements. The part can function from 5V. It features Schmitt Trigger.

SN74HC132DBR Features

NAND Gate Logic Type
Operating Temperature: -40°C~85°C
HC/UH Family
Quiescent Current: 2μA
Output Current: 5.2mA

SN74HC132DBR Applications

There are a lot of Texas Instruments SN74HC132DBR Gates and Inverters applications.

• Solar energy generation
• Mountain power station
• Grid adaptation function
• Agriculture and light complementary power station
• Solar street light
• Audio
• Computer
• MPPT function (maximum power point tracking)
• Projector
• Laptop