SN74HC139NSRE4

SN74HC139NSRE4 Overview

The reason it is provided is that the board space can be saved by placing digital switch in the SOP.It is packaged according to the Tape and Reel method.It is designed with 16 terminations as part of its basic configuration.In this case, 5V is the voltage supplied to the multiplexer's system.Signal switch has 16 component pins.A conductor terminates at GULL WING.The supply type of this multiplexer ic is Single.Currently, it is configured with 16 pins.This unit is mounted in the way of Surface Mount.The logic switch is included into the family of HC/UH.Decoder/Drivers is a category for the digital switch ics.No external influence consumes 80μA current of multiplexer ic.If the supply voltage is set to 5V, reliable performance of the multiplexers can be achieved.The signal source consists of 4 output lines.Signal switch operation at 85°C temperature is acceptable.Keeping the temperature of the multiplexer at -40°C is the minimum operating temperature.Device specifications specify 6V as the maximum supply voltage for the signal switches.According to its specifications, the digital swith requires a minimum supply voltage of 2V.There are 2 elements used for the mux switch configuration.It uses IC OTHER DECODER/DRIVER for its logic.

SN74HC139NSRE4 Features

Supplied in the SOP package
Adopting a supply type of Single
Operating with the supply voltage of 5V
4 output lines
OTHER DECODER/DRIVER as the logic IC

SN74HC139NSRE4 Applications

There are a lot of Texas Instruments SN74HC139NSRE4 Signal Switches / Multiplexers / Decoders applications.

• Electronically controlled engine system
• Medical industry
• Solenoid cooling fan
• Combinational circuit
• Speed control of medern motors
• To select different devices in microprocessor output
• To select different task for memory in microprocessor memory systems
• Data collection system
• Computer memory
• Make half adder