SN74HC139PWRG4

SN74HC139PWRG4 Overview

It is included in the TSSOP in order to save board space.The package is in the form of Tape and Reel.This configuration includes 16 terminations as part of its basic functionality.In this case, 5V is the voltage supplied to the multiplexer's system.Currently, this turn signal switch has a total of 16 component pins.GULL WING represents the end of conductors.The supply type of this multiplexer ic is Single.Currently, it is configured with 16 pins.Surface Mount is the way it is mounted.The logic switch is a member of the HC/UH family.The digital switch ic is a part of an electronic system classified as Decoder/Drivers.Not being affected by the external factors, consumes 80μA current of multiplexer ic.With a supply voltage of 5V, reliable performance of the multiplexers can be achieved.As the signal source, there are 4 output lines.A maximum temperature of 85°C is acceptable for this signal switch.Maintaining a minimum operating temperature of the multiplexer of -40°C is recommended.Upon compliance with the applicable device specifications, the device will operate at the maximum supply voltage of 6V.A minimum supply voltage of 2V is required to operate the digital swith.In mux switch configuration, there are 2 elements.A logic IC based on OTHER DECODER/DRIVER is employed in this system.

SN74HC139PWRG4 Features

Supplied in the TSSOP package
Adopting a supply type of Single
Operating with the supply voltage of 5V
4 output lines
OTHER DECODER/DRIVER as the logic IC

SN74HC139PWRG4 Applications

There are a lot of Texas Instruments SN74HC139PWRG4 Signal Switches / Multiplexers / Decoders applications.

• Microprocessor input/output systems
• Data demultiplexing
• Enabling different rows of memory depending on address in memory chips
• Medical industry
• Code converters
• Automatic Monitoring systems
• RF-based home automation system
• Audio transmission
• Code conversion
• Signal router