SN74HC14D

SN74HC14D Overview

The part can be shipped overseas conveniently because it is packaged in 14-SOIC (0.154, 3.90mm Width). This high-reliability packaging method uses advanced packaging methods Tube. It works based on the Inverter logic principle. This part needs a voltage of 2V~6V to function properly. The operating temperature is extended to around -40°C~85°C. Surface Mount is the location of the part. There is 5.2mA 5.2mA output current in the high or low states. This is part of the 74HC series. 14 terminations have been made so far. This part is equipped with 6 functions that will greatly enhance the user's experience. HC/UH is a chip that is part of this device. Try searching with 74HC14 if you're looking for device variants. An injection of 14 pins is performed into the body of the part. The logic device can be mounted on the Surface Mount axis and is used in a wide range of applications. Datasheets for functions of 14 pins are available. In the quiescent state, the part has 2μA current flowing through it. It is a typical Gates logic device. There is 50pF load capacitance on the part. This device requires a minimum voltage of 2V. Upon reaching 6V, the highest supply voltage (Vsup) is reached. A device with an output current of 5.2mA is rated. It is specified with the 5V volts voltage that the chip must be supplied with as its operating voltage. A feature of it is Schmitt Trigger. It outputs high quality logic via its 6 channels.

SN74HC14D Features

Inverter Logic Type
Operating Temperature: -40°C~85°C
HC/UH Family
Quiescent Current: 2μA
Output Current: 5.2mA

SN74HC14D Applications

There are a lot of Texas Instruments SN74HC14D Gates and Inverters applications.

• Grid adaptation function
• Electric car
• Residual current/leakage current protection
• Projector
• Air conditioner
• Solar street light
• Fan
• Roof distributed power station
• Small ground power station
• MPPT function (maximum power point tracking)