SN74HC157DRE4

SN74HC157DRE4 Overview

Providing this information in the SOIC enables digital switch board space to be saved.Tape & Reel (TR) represents its packaging.The basic configuration includes 16 terminations.The multiplexer's system is supplied with a voltage of 5V.A component pin count of 16 can be found on this turn signal switch.At the end of a conductor, it uses GULL WING as the point where the conductor ends.There is a type of supply Single that is employed in this case.The board has 16 pins configured.The multiplexer ic is mounted in the direction of Surface Mount.There is a family of HC/UH members.There are 2 bits signal multiplexer provides.The multiplexer provides 8 inputs.The signal switching is packaged by TR. The multiplexers have2 input lines on the board that accept voltage levels.The signal source consists of 1 output lines.In the turn signal switch's circuit, there are 4 channels used for transmission.There is no problem with operating this signal switch at the maximum temperature of 85°C.Ideally, the temperature of the multiplexer should not exceed -40°C.It is specified that the signal switches should operate at 6V as its maximum supply voltage.In compliance with the applicable device specification, the digital swith operates at a minimum supply voltage of 2V.

SN74HC157DRE4 Features

Supplied in the SOIC package
Adopting a supply type of Single
2 input lines
1 output lines

SN74HC157DRE4 Applications

There are a lot of Texas Instruments SN74HC157DRE4 Signal Switches / Multiplexers / Decoders applications.

• Telephone network
• Code conversion
• Frequency multiplexing system
• A robotic vehicle with the metal detector
• To select different devices in microprocessor output
• Code converters
• Injectors
• HDMI applications
• Data demultiplexing
• Used to connect a single source to multiple destinations