SN74HC166DR

SN74HC166DR Overview

In package 16-SOIC (0.154, 3.90mm Width), there is an embedded device. 16 is the number of terminations on the chip. There is a Cut Tape (CT) case containing it. The part operates at 5V voltage. A total of 1 elements can be found on this part. 16 pins are present on the device. Using Surface Mount as a mount point is recommended. Electronic components fall under the category of HC/UH. In Surface Mount, this component is mounted. A temperature range of -40°C~85°C is used for operation. There is a voltage supply within 2V~6V. The 74HC series contains this electrical component. Similar parts can be found by searching for the 74HC166 family. As noted, this chip operates within the range of 5V. The following additional aspects of this section are worth noting: SISO OPERATION ALSO AVAILABLE. There must be a minimum supply voltage (Vsup) of 2V for this part. A voltage of 2/6V can be delivered by it. The maximum supply voltage (Vsup) for this part should not be more than 6V. Operation is available on only 3 output lines. There is a quiescent current of 8μA running through it. There is a TR package for the part.

SN74HC166DR Features

With 16 pins
Mounted in Surface Mount type.
Based on 74HC166 family
Operate supply voltage at 5V
It supplies 2/6V power
With 3 output lines
Quiescent Current at 8μA
Packing Method : TR

SN74HC166DR Applications

There are a lot of Texas Instruments SN74HC166DR Shift Registers applications.

• Interconnectors
• Dual-rank shift, hold, and bus applications
• ROM Chips
• Pseudo Random Pattern Generator
• Cache memory in CPU
• Pattern Recognizers
• Remote control holding register
• store data in digital form
• temporary data storage
• Serial-to-parallel data conversion