SN74HC174DRG4

SN74HC174DRG4 Overview

As a result, it is packaged as 16-SOIC (0.154, 3.90mm Width). The Tape & Reel (TR)package contains it. The output it is configured with uses Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at a voltage of 2V~6V. -40°C~85°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. This type of FPGA is a part of the 74HC series. A frequency of 50MHzshould not be exceeded by its output. A total of 1 elements are present. During its operation, it consumes 8μA quiescent energy. There are 16 terminations,The object belongs to the 74HC174 family. It is powered from a supply voltage of 5V. A JK flip flop with a 3pFfarad input capacitance is used here. In this case, the D flip flop belongs to the HC/UHfamily. It is mounted by the way of Surface Mount. 16pins are included in its design. There is a clock edge trigger type of Positive Edgeon this device. This RS flip flops is a part number FF/Latches. The design is based on 6bits. Vsup reaches its maximum value at 6V. It is imperative that the supply voltage (Vsup) is maintained above 2Vin order to ensure normal operation. Considering its reliability, this T flip flop is well suited for TR. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. The output current of 5.2mA makes it feature maximum design flexibility. This input has 6lines.

SN74HC174DRG4 Features

Tape & Reel (TR) package
74HC series
16 pins
6 Bits

SN74HC174DRG4 Applications

There are a lot of Texas Instruments SN74HC174DRG4 Flip Flops applications.

• 2 – Bit synchronous counter
• Test & Measurement
• Registers
• Instrumentation
• Single Down Count-Control Line
• Data storage
• Patented noise
• Cold spare funcion
• Latch
• Consumer