SN74HC174DT

SN74HC174DT Overview

The item is packaged in 16-SOIC (0.154, 3.90mm Width)cases. D flip flop is embedded in the Tape & Reel (TR) package. In the configuration, Non-Invertedis used as the output. This trigger uses the value Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A 2V~6Vsupply voltage is required for it to operate. In this case, the operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. This type of FPGA is a part of the 74HC series. In order for it to function properly, its output frequency should not exceed 50MHz. A total of 1 elements are present. During its operation, it consumes 8μA quiescent energy. Currently, there are 16 terminations. D latch belongs to the 74HC174 family. The D flip flop is powered by a voltage of 5V . Its input capacitance is 3pF farads. An electronic device belonging to the family HC/UHcan be found here. There is an electronic part that is mounted in the way of Surface Mount. As you can see from the design, it has pins with 16. This device's clock edge trigger type is Positive Edge. The part is included in FF/Latches. Vsup reaches 6V, the maximal supply voltage. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. Its superior flexibility is attributed to its use of 7 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. If high efficiency is desired, the supply voltage should be kept at 5V. As a result of its output current of 5.2mA, it is very flexible in terms of design. As of now, there are 3input lines.

SN74HC174DT Features

Tape & Reel (TR) package
74HC series
16 pins

SN74HC174DT Applications

There are a lot of Texas Instruments SN74HC174DT Flip Flops applications.

• Digital electronics systems
• CMOS Process
• Control circuits
• Instrumentation
• Functionally equivalent to the MC10/100EL29
• Cold spare funcion
• Common Clocks
• ESD performance
• Dynamic threshold performance
• Memory