SN74HC175DT

SN74HC175DT Overview

In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. A package named Tape & Reel (TR)includes it. T flip flop is configured with an output of Differential. The trigger configured with it uses Positive Edge. Surface Mountmounts this electrical part. The JK flip flop operates at a voltage of 2V~6V. It is operating at -40°C~85°C TA. D-Typedescribes this flip flop. In terms of FPGAs, it belongs to the 74HC series. You should not exceed 60MHzin its output frequency. D latch consists of 1 elements. It consumes 8μA of quiescent current without being affected by external factors. There have been 16 terminations. If you search by 74HC175, you will find similar parts. Power is supplied from a voltage of 5V volts. A 3pFfarad input capacitance is provided by this T flip flop. It is a member of the HC/UHfamily of D flip flop. This electronic part is mounted in the way of Surface Mount. There are 16pins on it. This device has Positive Edgeas its clock edge trigger type. The part is included in FF/Latches. The flip flop is designed with 4bits. 6Vis the maximum supply voltage (Vsup). Normal operation requires a supply voltage (Vsup) above 2V. Using 4 circuits, it is highly flexible. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. For high efficiency, the supply voltage should be set to 5V. The output current of 5.2mA makes it feature maximum design flexibility. It operates with 2 output lines.

SN74HC175DT Features

Tape & Reel (TR) package
74HC series
16 pins
4 Bits

SN74HC175DT Applications

There are a lot of Texas Instruments SN74HC175DT Flip Flops applications.

• Parallel data storage
• High Performance Logic for test systems
• Dynamic threshold performance
• Reduced system switching noise
• Single Up Count-Control Line
• ESD performance
• Computers
• Data Synchronizers
• Registers
• Modulo – n – counter