SN74HC259DR

SN74HC259DR Overview

In the 16-SOIC (0.154, 3.90mm Width) package, it is embedded. As a result, it has a packaging of Cut Tape (CT). It uses Standard as the output. D-Type, Addressable is the logic type of this electrical device. Surface Mount is used to mount this electronic part. A 2V~6V voltage supply is required for operation. A temperature of -40°C~85°C is used for operation. There are a number of FPGAs in this series, including this one. There are 8 bits in this electronic part. The device consists of 16 terminations that are designed to be used in conjunction with it. This type belongs to the 74HC259 family. The device is operated when the supply voltage is set to 5V. There are 16 pins attached to it. There is a device in this electronic family called HC/UH. This board has 16 pins on it, which is what it is designed for. Surface Mount is the way in which this electronic part is mounted. Subcategory FF/Latches contains this part. It is possible to reach 6V when the maximum supply voltage (Vsup) has been reached. The device is powered by 2/6V power supplies. In order to operate properly, the supply voltage (Vsup) should be greater than 2V. The reliability of this device makes it well suited to TR. It features maximum flexibility in design due to 25mA output current. If you want to achieve high efficiency, make sure the supply voltage is at 5V. It consumes 8μA of quiescent current without being affected by outside factors. In total, it has 1 elements.

SN74HC259DR Features

16-SOIC (0.154, 3.90mm Width) package
74HC series
8 Bits
74HC259 family
16 pin count
16 pins
2/6V power supplies
1 elements

SN74HC259DR Applications

There are a lot of Texas Instruments SN74HC259DR Latches applications.

• Automatic test equipment
• Parallel Input
• Flip-flops
• Up-Down Johnson
• PCs and Notebooks
• Phase comparator
• Buffer register
• Network Switches
• Ring counter
• Sample and hold register