English

All Products

View All >>
  • SN74HC273DWG4

SN74HC273DWG4

8 Bit Flip Flop DUAL 20 Pins SOIC


  • Manufacturer: Texas Instruments
  • Origchip NO: 815-SN74HC273DWG4
  • Package: SOIC
  • Datasheet: -
  • Stock: 476
  • Description: 8 Bit Flip Flop DUAL 20 Pins SOIC(Kg)

Purchase & Inquiry

Transport

Purchase

You may place an order without registering to Utmel.
We strongly suggest you sign in before purchasing as you can track your order in real time.

Means of Payment

For your convenience, we accept multiple payment methods in USD, including PayPal, Credit Card, and wire transfer.

RFQ (Request for Quotations)

It is recommended to request for quotations to get the latest prices and inventories about the part.
Our sales will reply to your request by email within 24 hours.

IMPORTANT NOTICE

1. You'll receive an order information email in your inbox. (Please remember to check the spam folder if you didn't hear from us).
2. Since inventories and prices may fluctuate to some extent, the sales manager is going to reconfirm the order and let you know if there are any updates.

Shipping Cost

Shipping starts at $40, but some countries will exceed $40. For example (South Africa, Brazil, India, Pakistan, Israel, etc.)
The basic freight (for package ≤0.5kg or corresponding volume) depends on the time zone and country.

Shipping Method

Currently, our products are shipped through DHL, FedEx, SF, and UPS.

Delivery Time

Once the goods are shipped, estimated delivery time depends on the shipping methods you chose:

FedEx International, 5-7 business days.

The following are some common countries' logistic time.
transport

Details

Tags

Parameters
Mount Surface Mount
Package / Case SOIC
Number of Pins 20
Weight 500.709277mg
JESD-609 Code e4
Moisture Sensitivity Level (MSL) 1
Number of Terminations 20
ECCN Code EAR99
Terminal Finish Nickel/Palladium/Gold (Ni/Pd/Au)
Max Operating Temperature 85°C
Min Operating Temperature -40°C
Additional Feature DUMMY VAL
Subcategory FF/Latches
Packing Method TUBE
Technology CMOS
Terminal Position DUAL
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Number of Functions 1
Supply Voltage 5V
Frequency 60MHz
Time@Peak Reflow Temperature-Max (s) NOT SPECIFIED
Pin Count 20
Qualification Status Not Qualified
Operating Supply Voltage 5V
Polarity Non-Inverting
Temperature Grade INDUSTRIAL
Number of Circuits 8
Max Supply Voltage 6V
Min Supply Voltage 2V
Load Capacitance 50pF
Current - Output 5.2mA
Number of Bits 8
Propagation Delay 160 ns
Turn On Delay Time 13 ns
Family HC/UH
Logic Function D-Type, Flip-Flop
Logic IC Type D FLIP-FLOP
Max I(ol) 0.004 A
High Level Output Current -5.2mA
Low Level Output Current 5.2mA
Number of Input Lines 2
Number of Output Lines 1
Clock Edge Trigger Type Positive Edge
Height 2.35mm
Length 12.8mm
Width 7.52mm
RoHS Status RoHS Compliant
Lead Free Lead Free

SN74HC273DWG4 Overview


As a result, it is packaged as SOIC. The number of terminations is 20. Power is provided by a 5V supply. It belongs to the family of electronic devices known as HC/UH. Electronic part Surface Mountis mounted in the way. This board has 20 pins. This device's clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. 8bits are used in its design. To achieve this superior flexibility, 8 circuits are used. This D flip flop is well suited for TUBE based on its reliable performance. The supply voltage should be maintained at 5V for high efficiency. It is designed with 1 output lines. This input has 2lines in it. In addition, you can refer to the additinal DUMMY VAL of the D latch. -5.2mA is set as the high level output current. The low level output current is set to 5.2mA. There should be a temperature below 85°Cduring operation. If the operating temperature is higher than -40°C, the system should operate properly. It is powered by 2V as its minimum supply voltage. It supports a maximum supply voltage of 6V volts. The frequency that can be achieved is 60MHz. The logic IC it adopts is D FLIP-FLOP. Currently, it is equipped with 1 functions . 20pins are available on this JK flip flop. In addition to its maximum design flexibility, the output current of the flip flop is 5.2mA.

SN74HC273DWG4 Features


20 pins
8 Bits
1 Functions
20 pin count

SN74HC273DWG4 Applications


There are a lot of Texas Instruments SN74HC273DWG4 Flip Flops applications.

  • QML qualified product
  • Control circuits
  • EMI reduction circuitry
  • Buffered Clock
  • Asynchronous counter
  • Shift registers
  • Frequency Divider circuits
  • Power down protection
  • CMOS Process
  • Automotive