SN74HC273DWRE4

SN74HC273DWRE4 Overview

20-SOIC (0.295, 7.50mm Width)is the packaging method. You can find it in the Tape & Reel (TR)package. T flip flop uses Non-Invertedas the output. The trigger configured with it uses Positive Edge. This electronic part is mounted in the way of Surface Mount. A 2V~6Vsupply voltage is required for it to operate. Currently, the operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. The 74HCseries comprises this type of FPGA. You should not exceed 60MHzin the output frequency of the device. In total, it contains 1 elements. This process consumes 8μA quiescents. There are 20 terminations,If you search by 74HC273, you will find similar parts. It is powered by a voltage of 5V . There is 3pF input capacitance for this T flip flop. This D flip flop belongs to the family of HC/UH. This electronic part is mounted in the way of Surface Mount. There are 20pins on it. The clock edge trigger type for this device is Positive Edge. It is included in FF/Latches. It is designed with a number of bits of 8. As soon as 6Vis reached, Vsup reaches its maximum value. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. 8 circuits are used to achieve its superior flexibility. Considering the reliability of this T flip flop, it is well suited for TR. Optimal efficiency requires a supply voltage of 5V. With an output current of 5.2mA, this device offers maximum design flexibility. Currently, there are 2 input lines present. In addition, DUMMY VALis a characteristic of it.

SN74HC273DWRE4 Features

Tape & Reel (TR) package
74HC series
20 pins
8 Bits

SN74HC273DWRE4 Applications

There are a lot of Texas Instruments SN74HC273DWRE4 Flip Flops applications.

• Guaranteed simultaneous switching noise level
• Data transfer
• ESD performance
• Circuit Design
• Shift registers
• Data Synchronizers
• Computers
• Modulo – n – counter
• Frequency Dividers
• Functionally equivalent to the MC10/100EL29