SN74HC373DBR

SN74HC373DBR Overview

In the 20-SSOP (0.209, 5.30mm Width) package, it is embedded. A Cut Tape (CT) package is used to package it. In this configuration, the output is set to Tri-State. The Logic type of this electrical device is D-Type Transparent Latch. A Surface Mount mount is used for mounting this electronic part. There is no supply voltage for this device. There is a temperature of -40°C~85°C at which the system operates. This FPGA is part of the 74HC series. The design of this electronic part contains 8 bits. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. 74HC373 is the family name of it. With the supply voltage set at 5V, it is able to operate. 20 pins are included. There is a device in this electronic family called HC/UH. Designed with 20 pins, it is compatible with a wide range of devices. This electronic part is mounted in the way of Surface Mount. 2 ports are available on this device. Subcategory FF/Latches contains this part. It reaches 6V when the supply voltage (Vsup) reaches maximum. It operates from 2/6V power supplies. It is recommended to have a higher supply voltage (Vsup) than 2V. In the circuit, there are 3 input lines that are constituted by an electronic circuit. The device's reliable performance makes it a good choice for TR. The output current of 7.8mA makes it feature maximum design flexibility. High efficiency requires maintaining the supply voltage at 5V. It consumes 8μA of quiescent current without being affected by external factors.

SN74HC373DBR Features

20-SSOP (0.209, 5.30mm Width) package
74HC series
8 Bits
74HC373 family
20 pin count
20 pins
2/6V power supplies

SN74HC373DBR Applications

There are a lot of Texas Instruments SN74HC373DBR Latches applications.

• Counter control
• Phase comparator
• Registers
• Digital bus buffer
• Control circuits
• Automotive ADAS
• Decade counting
• Pattern Generators
• Up-Down Johnson
• Stacked or Push-Down Registers