SN74HC373DWR

SN74HC373DWR Overview

20-SOIC (0.295, 7.50mm Width) contains it. The package is in the form of Tape & Reel (TR). It uses Tri-State as its output configuration. This electrical device has a logic type of D-Type Transparent Latch. The way in which this electronic part is mounted is Surface Mount. A voltage of 2V~6V is used as the supply voltage for this device. There is a temperature of -40°C~85°C at which the system operates. An FPGA in this series belongs to the 74HC family. The design of this electronic part contains 8 bits. This device has 20 terminations. 74HC373 is its family. A 5V voltage supply is required for operation. There are 20 pins attached to it. It is part of the family of electronic devices called HC/UH. It is designed with 20 pins. Surface Mount is the method used for mounting this electronic part. This device has a total of 2 ports. The part belongs to the FF/Latches subcategory. The maximal supply voltage (Vsup) reaches 6V. It operates from 2/6V power supplies. The supply voltage (Vsup) should be greater than 2V. It contains 3 input lines where electronic circuits are present. On the basis of its reliability, this device is well suited for TR. The 7.8mA output current gives it maximum design flexibility. If you want to achieve high efficiency, make sure the supply voltage is at 5V. As far as external factors are concerned, it consumes 8μA of quiescent current without getting affected by them. Its superior flexibility is achieved by using 8 circuits.

SN74HC373DWR Features

20-SOIC (0.295, 7.50mm Width) package
74HC series
8 Bits
74HC373 family
20 pin count
20 pins
2/6V power supplies

SN74HC373DWR Applications

There are a lot of Texas Instruments SN74HC373DWR Latches applications.

• Serial Input
• Automotive Body Electronics
• TV Set-top Boxes
• Flip-flops
• Counter timers
• Automotive Cluster
• Up/down difference counting
• Buffer/Storage Registers
• Avionics
• Shift right with parallel loading