SN74HC590ADW

SN74HC590ADW Overview

This device is supplied in the 16-SOIC (0.295, 7.50mm Width) package. The configuration of this device is based on 16terminations. 5Vis fully flexible due to its voltage supply. The 1elements are connected by wires. There are a total of 16 pins in all components. As a result, it is packaged as Tube. In the circuit, there are 16pins that connect other components. It is mounted in the way of [0]. In this case, it emerges as a member of the HC/UH family. As a member of the 74HCseries, it is ideal for a wide range of applications. The logic type of Binary Counter is adopted. It is recommended to set the operating temperature to -40°C~85°C. In this case, it is mounted with a Surface Mounttype. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. Each element in the array stores 8 bits. As far as Pbfree code is concerned, the result may be yes. An important feature of this electronic device is [0]. The base part number of 74HC590provides access to more related parts. There is 2/6V voltage comes from the voltage source. In order to operate, it requires a voltage of [0]. As low as 2V Vsup is the minimum supply voltage. There is 40MHz frequency associated with it. Typically, the supply voltage (Vsup) is limited to 6V.

SN74HC590ADW Features

Embedded in the 16-SOIC (0.295, 7.50mm Width) package
8 bits per element
RCO OUTPUT; REGISTERED OUTPUTS
Operating supply voltage of 5V
Frequency of 40MHz

SN74HC590ADW Applications

There are a lot of Texas Instruments SN74HC590ADW Counters & Dividers applications.

• TRUE RMS-TO-DC CONVERSION
• Binary counter/decoder
• Decade counter/decimal decode display (CD4017B）
• Frequency division
• Counter control/timers
• MULTIPLICATION
• Fixed and programmable counters greater than 10
• Timing applications
• Signal gating
• Communications Digital Frequency Synthesizers;