SN74HC590AN

SN74HC590AN Overview

This is a device supplied in the 16-DIP (0.300, 7.62mm) package. There are 16terminations used for configuring it. Having a supply voltage of 5V enables to operate in a fully flexible manner. The device has 1terminations. All component pins are equal to 16. Tubeis used to package it. In the circuit, 16pins are used to connect other components. Through Holeis the way in which it is mounted. In this case, it appears as a member of the HC/UH family. Having been designed as a member of the 74HCseries, it is well suited to a variety of applications. A logic type of Binary Counter is adopted. The operating temperature should be set at -40°C~85°C. This device is mounted in a Through Holemanner. As long as the supply voltage is set to [0], the device can operate with a greater degree of reliability. The array stores 8bits in each element. It is important to note that in regards to this electronic device, RCO OUTPUT; REGISTERED OUTPUTSis an extremely significant feature. More related parts are available under its base part number 74HC590. The voltage source produces a voltage of 2/6V volts. To operate, it requires a supply voltage of [0]. Supply voltages can be as low as 2V volts (Vsup). It operates with the frequency of 40MHz. Up to a maximum voltage of 6Vcan be supplied (Vsup).

SN74HC590AN Features

Embedded in the 16-DIP (0.300, 7.62mm) package
8 bits per element
RCO OUTPUT; REGISTERED OUTPUTS
Operating supply voltage of 5V
Frequency of 40MHz

SN74HC590AN Applications

There are a lot of Texas Instruments SN74HC590AN Counters & Dividers applications.

• Fixed and programmable counters greater than 10
• ANALOG SIGNAL PROCESSING
• Divide-by"N" counters/frequency synthesizers
• Digital multiplexing and demultiplexing
• SQUARING
• MULTIPLICATION
• Analog multiplexing and demultiplexing
• Timing applications
• Decade counter/decimal decode display (CD4017B）
• Clocks