SN74HC7032N

SN74HC7032N Overview

Due to its 14-DIP (0.300, 7.62mm) packaging, the part is convenient for international shipping. This packaging method provides high reliability because it uses advanced packaging techniques. Based on the OR Gate logic principle, it works. Voltage 2V~6V is needed to ensure the part's full functionality. Operating temperature around -40°C~85°C extended. Part Through Hole is mounted. In the low and high states of output current, the current is 5.2mA 5.2mA. There are several in the 74HC series. 14 terminations have been made so far. This part is equipped with 4 functions that will greatly enhance the user's experience. It is part of the HC/UH family of chips. Try searching with 74HC7032 if you're looking for device variants. The part body receives 14 pins. There are many applications for this logic device, mounted at Through Hole. Datasheets for functions of 14 pins are available. A 2 input is supported by the part. As the part is in a quiescent state, it has 2μA current flowing through it. The logic device is a typical Gates. The part bears a load capacitance of 50pF. This device requires a minimum voltage of 2V. When 6V is reached, the maximum supply voltage (Vsup) is reached. Current output of the device is rated at 5.2mA. A device with 1 outputs is available. The total number of elements used for operation is 4. The operating supply voltage for the chip is specified as 5V volts, which corresponds to the chip voltage. This product has Schmitt Trigger.

SN74HC7032N Features

OR Gate Logic Type
Operating Temperature: -40°C~85°C
HC/UH Family
Quiescent Current: 2μA
Output Current: 5.2mA

SN74HC7032N Applications

There are a lot of Texas Instruments SN74HC7032N Gates and Inverters applications.

• Island protection
• In-vehicle system
• Electric grinding wheel
• Television
• Hair dryer
• Agriculture and light complementary power station
• Electric car
• Massager
• Electricity for military and civilian life in areas without electricity
• Air conditioner