SN74HC74DBRG4

SN74HC74DBRG4 Overview

The package is in the form of 14-SSOP (0.209, 5.30mm Width). Package Tape & Reel (TR)embeds it. T flip flop is configured with an output of Differential. There is a trigger configured with Positive Edge. Surface Mountmounts this electrical part. It operates with a supply voltage of 2V~6V. It is at -40°C~85°C TAdegrees Celsius that the system is operating. A flip flop of this type is classified as a D-Type. JK flip flop is a part of the 74HCseries of FPGAs. You should not exceed 60MHzin its output frequency. Despite external influences, it consumes 4μAof quiescent current. A total of 14 terminations have been made. It is a member of the 74HC74 family. It is powered by a voltage of 5V . There is 3pF input capacitance for this T flip flop. In this case, the D flip flop belongs to the HC/UHfamily. There is an electronic part mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. Its clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. It reaches the maximum supply voltage (Vsup) at 6V. The supply voltage (Vsup) should be maintained above 2V for normal operation. Despite its superior flexibility, it relies on 2 circuits to achieve it. Considering its reliability, this T flip flop is well suited for TR. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. Its output current of 5.2mAallows for maximum design flexibility. Currently, there are 4 lines of input.

SN74HC74DBRG4 Features

Tape & Reel (TR) package
74HC series
14 pins

SN74HC74DBRG4 Applications

There are a lot of Texas Instruments SN74HC74DBRG4 Flip Flops applications.

• Patented noise
• Guaranteed simultaneous switching noise level
• Bounce elimination switch
• Frequency Dividers
• Frequency division
• Communications
• Cold spare funcion
• Clock pulse
• Dynamic threshold performance
• EMI reduction circuitry