SN74HC74QDRQ1

SN74HC74QDRQ1 Overview

The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. It is contained within the Tape & Reel (TR)package. The output it is configured with uses Differential. This trigger is configured to use Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 2V~6Vvolts. In the operating environment, the temperature is -40°C~125°C TA. D-Typeis the type of this D latch. The Automotive, AEC-Q100, 74HCseries comprises this type of FPGA. Its output frequency should not exceed 60MHz Hz. T flip flop consumes 4μA quiescent energy. There are 14 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. If you search by 74HC74, you will find similar parts. A voltage of 5V is used as the power supply for this D latch. A JK flip flop with a 3pFfarad input capacitance is used here. Electronic devices of this type belong to the HC/UHfamily. Electronic part Surface Mountis mounted in the way. With its 14pins, it is designed to work with most electronic flip flops. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latch. Vsup reaches 6V, the maximal supply voltage. Normal operation requires a supply voltage (Vsup) above 2V. The superior flexibility is achieved through the use of 2 circuits. In light of its reliable performance, this T flip flop is well suited for TR. For high efficiency, the supply voltage should be set to 5V. Featuring the maximum design flexibility, it has an output current of 5.2mA . Currently, there are 4 input lines present.

SN74HC74QDRQ1 Features

Tape & Reel (TR) package
Automotive, AEC-Q100, 74HC series
14 pins

SN74HC74QDRQ1 Applications

There are a lot of Texas Instruments SN74HC74QDRQ1 Flip Flops applications.

• Consumer
• ESD protection
• Individual Asynchronous Resets
• Memory
• Instrumentation
• Circuit Design
• Storage Registers
• Control circuits
• Buffer registers
• Common Clocks