SN74HCT02DR

SN74HCT02DR Overview

As the part is packed in 14-SOIC (0.154, 3.90mm Width), international shipping is convenient. A high level of reliability can be achieved through the use of an advanced packaging method Cut Tape (CT). It works based on the NOR Gate logic principle. The part must have a voltage of 4.5V~5.5V in order to function properly. Temperatures around -40°C~85°C are extended for operation. It is mounted in position Surface Mount. The high and low state of output current is 4mA 4mA. A 74HCT series product. A total of 14 terminations have been recorded. Users will benefit significantly from 4 functions in this part. The chip is a part of HCT. Try searching with 74HCT02 if you're looking for device variants. Into the part body are injected 14 pins. The logic device can be mounted on the Surface Mount axis and is used in a wide range of applications. To find out what the 14 pins do, please refer to the datasheets. A 2 input is supported by the part. The part has 2μA current flowing through it in the quiescent state. There is 50pF load capacitance associated with the part. A method of industry TR is included in the package. The datasheet specifies that the part requires 5V volts of power. Its output current is rated at 4mA. This device has 1 outputs. Totally, there are 4 elements used for operation. The operating supply voltage for the chip is specified as 5V volts, which corresponds to the chip voltage.

SN74HCT02DR Features

NOR Gate Logic Type
Operating Temperature: -40°C~85°C
HCT Family
Quiescent Current: 2μA
Output Current: 4mA

SN74HCT02DR Applications

There are a lot of Texas Instruments SN74HCT02DR Gates and Inverters applications.

• Illumination
• Laptop
• Troubleshooting & Judgment
• Grid adaptation function
• Mobile caravan
• Photovoltaic system
• Agriculture and light complementary power station
• Fax machine
• Range hood
• Computer