SN74HCT273N

SN74HCT273N Overview

20-DIP (0.300, 7.62mm)is the way it is packaged. You can find it in the Tubepackage. Currently, the output is configured to use Non-Inverted. The trigger configured with it uses Positive Edge. There is an electric part mounted in the way of Through Hole. The JK flip flop operates at a voltage of 4.5V~5.5V. The operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. In this case, it is a type of FPGA belonging to the 74HCT series. You should not exceed 37MHzin the output frequency of the device. D latch consists of 1 elements. There have been 20 terminations. The 74HCT273family includes it. A voltage of 5V provides power to the D latch. A 3pFfarad input capacitance is provided by this T flip flop. Electronic devices of this type belong to the HCTfamily. There is an electronic part mounted in the way of Through Hole. The electronic flip flop is designed with pins 20. The clock edge trigger type for this device is Positive Edge. This device has the base part number FF/Latches. There are 8bits in this flip flop. The system runs on a power supply of 5V watts. In order to ensure high efficiency, the supply voltage should remain at 5V. The 4mA output current allows it to be designed with the greatest amount of flexibility. The number of input lines is 3. As a result, it consumes 8μA of quiescent current without being affected by external factors. The number of channels is growing strong/weak: 8.

SN74HCT273N Features

Tube package
74HCT series
20 pins
8 Bits
5V power supplies

SN74HCT273N Applications

There are a lot of Texas Instruments SN74HCT273N Flip Flops applications.

• ESCC
• Frequency division
• Pattern generators
• Data transfer
• Memory
• ESD performance
• Load Control
• Counters
• Balanced Propagation Delays
• Divide a clock signal by 2 or 4