SN74HCT273PW

SN74HCT273PW Overview

20-TSSOP (0.173, 4.40mm Width)is the packaging method. It is contained within the Tubepackage. Non-Invertedis the output configured for it. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. In the operating environment, the temperature is -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. The 74HCTseries comprises this type of FPGA. It should not exceed 37MHzin terms of its output frequency. In total, it contains 1 elements. There is 8μA quiescent consumption. Currently, there are 20 terminations. D latch belongs to the 74HCT273 family. An input voltage of 5Vpowers the D latch. There is 3pF input capacitance for this T flip flop. In this case, the D flip flop belongs to the HCTfamily. There is an electronic component mounted in the way of Surface Mount. The 20pins are designed into the board. This device has Positive Edgeas its clock edge trigger type. This RS flip flops is a part number FF/Latches. An electronic part designed with 8bits is used in this application. The D latch operates on 5V volts. For high efficiency, the supply voltage should be kept at 5V. It offers maximum design flexibility with its output current of 4mA. The number of input lines is 3. Currently, there are 8 channels available.

SN74HCT273PW Features

Tube package
74HCT series
20 pins
8 Bits
5V power supplies

SN74HCT273PW Applications

There are a lot of Texas Instruments SN74HCT273PW Flip Flops applications.

• Frequency division
• Communications
• Clock pulse
• Memory
• Frequency Divider circuits
• Data storage
• ESD protection
• Supports Live Insertion
• Functionally equivalent to the MC10/100EL29
• Storage registers