SN74HCT374PWT

SN74HCT374PWT Overview

As a result, it is packaged as 20-TSSOP (0.173, 4.40mm Width). It is included in the package Tape & Reel (TR). T flip flop uses Tri-State, Non-Invertedas the output. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 4.5V~5.5V. It is operating at a temperature of -40°C~85°C TA. This D latch has the type D-Type. FPGAs belonging to the 74HCTseries contain this type of chip. Its output frequency should not exceed 40MHz. In total, there are 1 elements. This process consumes 8μA quiescents. It has been determined that there have been 20 terminations. D latch belongs to the 74HCT374 family. The D flip flop is powered by a voltage of 5V . The input capacitance of this JK flip flopis 3pF farads. In this case, the D flip flop belongs to the HCTfamily. The electronic part is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. This device exhibits a clock edge trigger type of Positive Edge. The part is included in FF/Latches. An electronic part designed with 8bits is used in this application. Due to its superior flexibility, it uses 8 circuits. Due to its reliability, this T flip flop is well suited for TR. The D latch runs on a voltage of 5V volts. There are 2 ports embedded in the flip flops. For high efficiency, the supply voltage should be kept at 5V. Featuring the maximum design flexibility, it has an output current of 6mA . As of now, there are 3input lines.

SN74HCT374PWT Features

Tape & Reel (TR) package
74HCT series
20 pins
8 Bits
5V power supplies

SN74HCT374PWT Applications

There are a lot of Texas Instruments SN74HCT374PWT Flip Flops applications.

• Data Synchronizers
• ESCC
• Computers
• Clock pulse
• Dynamic threshold performance
• Supports Live Insertion
• Single Down Count-Control Line
• Differential Individual
• Counters
• Load Control