SN74HCT573DBR

SN74HCT573DBR Overview

In the 20-SSOP (0.209, 5.30mm Width) package, it can be found as an embedded module. Cut Tape (CT) is the way it is packaged. It uses Tri-State as its output configuration. A D-Type Transparent Latch logic type is used in this electrical device. Electronic components are mounted using the Surface Mount method. The voltage supply is 4.5V~5.5V. The operating temperature is -40°C~85°C. The 74HCT series is associated with this FPGA. The design of this electronic part is based on 8 bits. This device has been designed with 20 terminations available. The family it belongs to is 74HCT573. The device works with a voltage of 5V for its supply voltage. There are 20 pins attached to it. It is part of the family of electronic devices called HCT. The 20 pins are designed into it. Surface Mount is used to mount this electronic part. In this device, there are 2 ports. The part is in the Bus Driver/Transceiver subcategory. There are 5V power supplies required for this machine to operate. It consists of 3 input lines from which an electronic circuit can be built. The reliability of this device makes it well suited to TR. Its 6mA output current allows for maximum design flexibility. A high efficiency supply voltage should be maintained at 5V. Without external influences, it consumes 8μA of quiescent current. Its superior flexibility is achieved by using 8 circuits.

SN74HCT573DBR Features

20-SSOP (0.209, 5.30mm Width) package
74HCT series
8 Bits
74HCT573 family
20 pin count
20 pins
5V power supplies

SN74HCT573DBR Applications

There are a lot of Texas Instruments SN74HCT573DBR Latches applications.

• High-speed logic
• Relay
• Shift Registers
• Stacked or Push-Down Registers
• Buffer register
• Lamp and Display (LED)
• Phase comparator
• Bus system register with enable parallel lines at bus side
• Data acquisition
• Automotive Cluster