SN74LS259BNSR

SN74LS259BNSR Overview

In the 16-SOIC (0.209, 5.30mm Width) package, it can be found as an embedded module. A Tape & Reel (TR) package is used to package it. It uses Standard as its output configuration. The Logic type of this electrical device is D-Type, Addressable. Mounting this electronic component follows the Surface Mount method. A voltage of 4.75V~5.25V is used as the supply voltage for this device. It operates at 0°C~70°C degrees Celsius. There are a number of FPGAs in this series, including this one. Electronic parts with 8 bits are designed for this application. A device with this design has 16 terminations. As a member of the 74LS259 family, it falls under that category. The device works with a voltage of 5V for its supply voltage. The 16 pind are equipped with it. It is a member of the LS family of electronic devices. This board has 16 pins on it, which is what it is designed for. It is mounted according to the Surface Mount method. This part is included in FF/Latches. There are 5V power supplies attached to it. (Vsup) should be greater than 4.75V. There are electronic circuits attached to the 3 input lines. On the basis of its reliability, this device is well suited for TAPE AND REEL. With an output current of 8mA, it is highly flexible in terms of design. Regardless of the input line, the binary equivalent of the input line will be generated by the 2 output lines.

SN74LS259BNSR Features

16-SOIC (0.209, 5.30mm Width) package
74LS series
8 Bits
74LS259 family
16 pin count
16 pins
5V power supplies

SN74LS259BNSR Applications

There are a lot of Texas Instruments SN74LS259BNSR Latches applications.

• Bus system register with enable parallel lines at bus side
• Communication systems
• Clocks
• Parallel Input
• Buffer register
• General-Purpose Register
• Watches
• Address register
• Shift left register
• Double bus register system