SN74LS377NSR

SN74LS377NSR Overview

It is packaged in the way of 20-SOIC (0.209, 5.30mm Width). Package Tape & Reel (TR)embeds it. As configured, the output uses Non-Inverted. Positive Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 4.75V~5.25Vis used as the supply voltage. In this case, the operating temperature is 0°C~70°C TA. D-Typeis the type of this D latch. In terms of FPGAs, it belongs to the 74LS series. In order for it to function properly, its output frequency should not exceed 40MHz. D latch consists of 1 elements. Despite external influences, it consumes 28mAof quiescent current. It has been determined that there have been 20 terminations. You can search similar parts based on 74LS377. The D flip flop is powered by a voltage of 5V . Electronic devices of this type belong to the LSfamily. There is an electronic part mounted in the way of Surface Mount. This board is designed with 20pins on it. The clock edge trigger type for this device is Positive Edge. This device has the base part number FF/Latches. An electronic part designed with 8bits is used in this application. The superior flexibility of this circuit is achieved by using 8 circuits. On the basis of its reliable performance, this D flip flop is well suited for use with TR. The power supply is 5V. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. In addition to its maximum design flexibility, the output current of the T flip flop is 8mA. It is designed with 2 output lines. It has 3lines.

SN74LS377NSR Features

Tape & Reel (TR) package
74LS series
20 pins
8 Bits
5V power supplies

SN74LS377NSR Applications

There are a lot of Texas Instruments SN74LS377NSR Flip Flops applications.

• Asynchronous counter
• Storage registers
• QML qualified product
• High Performance Logic for test systems
• ESD protection
• Test & Measurement
• Digital electronics systems
• Counters
• Buffered Clock
• Clock pulse