SN74LS378N

SN74LS378N Overview

The flip flop is packaged in 16-DIP (0.300, 7.62mm). The package Tubecontains it. As configured, the output uses Non-Inverted. JK flip flop uses Positive Edgeas the trigger. There is an electronic component mounted in the way of Through Hole. A voltage of 4.75V~5.25Vis required for its operation. It is operating at a temperature of 0°C~70°C TA. Logic flip flops of this type are classified as D-Type. In terms of FPGAs, it belongs to the 74LS series. It should not exceed 40MHzin its output frequency. D latch consists of 1 elements. As a result, it consumes 22mA of quiescent current without being affected by external factors. A total of 16 terminations have been made. You can search similar parts based on 74LS378. A voltage of 5V is used to power it. It belongs to the family of electronic devices known as LS. Through Hole mounts this electronic component. There are 16pins on it. It has a clock edge trigger type of Positive Edge. This RS flip flops is a part number FF/Latches. This flip flop is designed with 6 Bits. Due to its superior flexibility, it uses 7 circuits. The D latch runs on a voltage of 5V volts. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. The output current of 8mA makes it feature maximum design flexibility. Currently, there are 3 lines of input. WITH HOLD MODEis also one of its characteristics. The number of channels is growing strong/weak: 6.

SN74LS378N Features

Tube package
74LS series
16 pins
6 Bits
5V power supplies

SN74LS378N Applications

There are a lot of Texas Instruments SN74LS378N Flip Flops applications.

• Computing
• Convert a momentary switch to a toggle switch
• Digital electronics systems
• Modulo – n – counter
• Bounce elimination switch
• ESD protection
• CMOS Process
• Memory
• Set-reset capability
• EMI reduction circuitry