SN74LS74ADRG4

SN74LS74ADRG4 Overview

It is embeded in 14-SOIC (0.154, 3.90mm Width) case. It is contained within the Tape & Reel (TR)package. This output is configured with Differential. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. A supply voltage of 4.75V~5.25V is required for operation. The operating temperature is 0°C~70°C TA. This logic flip flop is classified as type D-Type. JK flip flop belongs to the 74LSseries of FPGAs. You should not exceed 33MHzin its output frequency. The number of terminations is 14. The object belongs to the 74LS74 family. The power source is powered by 5V. A device of this type belongs to the family of LS. It is mounted in the way of Surface Mount. As you can see from the design, it has pins with 14. This device's clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latch. 2 circuits are used to achieve its superior flexibility. As a result of its reliable performance, this T flip flop is suitable for TR. The D latch operates on 5V volts. The supply voltage should be maintained at 5V for high efficiency. It offers maximum design flexibility with its output current of 8mA. In order for the chip to function, it has 1output lines.

SN74LS74ADRG4 Features

Tape & Reel (TR) package
74LS series
14 pins
5V power supplies

SN74LS74ADRG4 Applications

There are a lot of Texas Instruments SN74LS74ADRG4 Flip Flops applications.

• Bus hold
• High Performance Logic for test systems
• Power down protection
• 2 – Bit synchronous counter
• CMOS Process
• Memory
• Data transfer
• Consumer
• Control circuits
• Cold spare funcion