SN74LV163APWR

SN74LV163APWR Overview

In the 16-TSSOP (0.173, 4.40mm Width)package, it is supplied. It is configured using 16terminations. By supplying 2.5Vwith a voltage of 2.5V , the device can be operated in a completely flexible manner. The 1elements are connected by wires. A total of 16pins are present on all components. As a result, it is packaged in the way of a Cut Tape (CT). As part of the circuit, there are 16pins that connect other components. It is mounted in the direction of [0]. In this case, it emerges as a member of the LV/LV-A/LVX/H family. With its 74LVseries designation, it can be used for a range of applications. It is adopted that the logic type is [0]. In this case, the operating temperature should be set to -40°C~85°C. This device is mounted in a Surface Mountmanner. Providing a voltage of 2V~5.5Vensures higher reliability of operation. The array has 4elements. The result may be yesin terms of Pbfree code. It is important to note that TCO OUTPUTare really important features of this electronic device. Among its base part number [0], you will find additional parts that are related. It is packed using [0]. In this case, 3.3Vvoltage is generated by the voltage source. Supply voltages can be as low as 2V volts (Vsup). In this case, the frequency is 160MHz Hz. There is 5.5V maximum supply voltage (Vsup) allowed. The device consumes a quiescent current of 20μA volts.

SN74LV163APWR Features

Embedded in the 16-TSSOP (0.173, 4.40mm Width) package
4 bits per element
TCO OUTPUT
Frequency of 160MHz

SN74LV163APWR Applications

There are a lot of Texas Instruments SN74LV163APWR Counters & Dividers applications.

• Binary counter/decoder
• Frequency division
• Frequency dividers
• Fixed and programmable divide-by-10,9,8,7,6,5,4,3,2 counters
• counting/frequency sy nthesizers-BCD output
• TRUE RMS-TO-DC CONVERSION
• Digital multiplexing and demultiplexing
• Communications Digital Frequency Synthesizers;
• Time-delay circuits
• Clocks