SN74LV165ADR

SN74LV165ADR Overview

There is an embedded device in the package 16-SOIC (0.154, 3.90mm Width). 16 is the total number of terminations on the chip. Cut Tape (CT) is the case in which it is packed. There is 2.5V operating supply voltage listed on the part. 1 elements make up this part. There are 16 pins on the device. The recommended mounting method is Surface Mount. Electronic components fall under the category of LV/LV-A/LVX/H. As you can see, this component is mounted in the way of Surface Mount. It is important to note that the operating temperature range is -40°C~125°C. It is supplied with voltage within 2V~5.5V. It is part of the 74LV series of electrical components. By using the 74LV165 family, you can find similar parts. Additional aspects of this section are as follows: SISO OPERATION ALSO AVAILABLE. There should be no voltage less than 2V at the minimum supply voltage (Vsup). The device is capable of delivering voltage at 3.3V. It should not exceed 5.5V in terms of the supply voltage (Vsup). IC chip bits total 8. There is a quiescent current of 20μA in this circuit. This device has 8 circuits. TR is the packaging way for the part. 165MHz is the device's frequency. It has 2 outputs.

SN74LV165ADR Features

With 16 pins
Mounted in Surface Mount type.
Based on 74LV165 family
It supplies 3.3V power
Quiescent Current at 20μA
Packing Method : TR

SN74LV165ADR Applications

There are a lot of Texas Instruments SN74LV165ADR Shift Registers applications.

• Counter
• Serial to parallel converter
• LED matrix control
• ROM Chips
• Remote control holding register
• Generate time delay toward digital circuits
• Output expansion
• Delay Line
• Remote control holding register
• 8-bit data storage