SN74LV174APW

SN74LV174APW Overview

16-TSSOP (0.173, 4.40mm Width)is the way it is packaged. D flip flop is included in the Tubepackage. There is a Non-Invertedoutput configured with it. This trigger is configured to use Positive Edge. The electronic part is mounted in the way of Surface Mount. A voltage of 2V~5.5Vis required for its operation. In this case, the operating temperature is -40°C~85°C TA. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74LV series. There should be no greater frequency than 180MHzon its output. A total of 1elements are present in it. There is a consumption of 20μAof quiescent energy. A total of 16 terminations have been made. This D latch belongs to the family of 74LV174. It is powered by a voltage of 2.5V . Input capacitance of this device is 1.7pF farads. It belongs to the family of electronic devices known as LV/LV-A/LVX/H. It is mounted by the way of Surface Mount. There are 16pins on it. Its clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. The maximal supply voltage (Vsup) reaches 5.5V. The supply voltage (Vsup) should be kept above 2V for normal operation. To achieve this superior flexibility, 7 circuits are used. It runs on 3.3Vvolts of power. As a result of its output current of 12mA, it is very flexible in terms of design. A total of 2input lines have been provided.

SN74LV174APW Features

Tube package
74LV series
16 pins
3.3V power supplies

SN74LV174APW Applications

There are a lot of Texas Instruments SN74LV174APW Flip Flops applications.

• Divide a clock signal by 2 or 4
• CMOS Process
• Common Clocks
• Frequency Dividers
• ESD protection
• Load Control
• Matched Rise and Fall
• EMI reduction circuitry
• Patented noise
• Digital electronics systems