SN74LV175ANSR

SN74LV175ANSR Overview

It is embeded in 16-SOIC (0.209, 5.30mm Width) case. You can find it in the Cut Tape (CT)package. There is a Differentialoutput configured with it. It is configured with the trigger Positive Edge. Surface Mountis occupied by this electronic component. A voltage of 2V~5.5Vis required for its operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. D-Typedescribes this flip flop. The 74LVseries comprises this type of FPGA. This D flip flop should not have a frequency greater than 165MHz. D latch consists of 1 elements. A total of 16 terminations have been made. The 74LV175 family contains it. Power is provided by a 2.5V supply. Input capacitance of this device is 1.4pF farads. In this case, the D flip flop belongs to the LV/LV-A/LVX/Hfamily. There is an electronic part mounted in the way of Surface Mount. There are 16pins on it. A Positive Edgeclock edge trigger is used in this device. It is part of the FF/Latchesbase part number family. It is designed with a number of bits of 4. In this case, the maximum supply voltage (Vsup) reaches 5.5V. Normally, the supply voltage (Vsup) should be above 2V. 4 circuits are used to achieve its superior flexibility. Due to its reliability, this T flip flop is well suited for TR. An electrical current of 3.3V volts is applied to it. In addition to its maximum design flexibility, the output current of the T flip flop is 12mA. There are 2 output lines on it. 20μAquiescent current consumed.

SN74LV175ANSR Features

Cut Tape (CT) package
74LV series
16 pins
4 Bits
3.3V power supplies

SN74LV175ANSR Applications

There are a lot of Texas Instruments SN74LV175ANSR Flip Flops applications.

• Convert a momentary switch to a toggle switch
• Data Synchronizers
• Matched Rise and Fall
• Communications
• Computing
• Power down protection
• Automotive
• Pattern generators
• Divide a clock signal by 2 or 4
• Registers