SN74LV74APWT

SN74LV74APWT Overview

The package is in the form of 14-TSSOP (0.173, 4.40mm Width). You can find it in the Tape & Reel (TR)package. Currently, the output is configured to use Differential. It is configured with a trigger that uses Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2V~5.5V. It is operating at a temperature of -40°C~125°C TA. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 74LVseries of FPGAs. A frequency of 140MHzshould be the maximum output frequency. As a result, it consumes 20μA of quiescent current without being affected by external factors. The number of terminations is 14. D latch belongs to the 74LV74 family. Power is supplied from a voltage of 2.5V volts. The input capacitance of this T flip flop is 2pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of LV/LV-A/LVX/H. This electronic part is mounted in the way of Surface Mount. There are 14pins on it. Its clock edge trigger type is Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. It reaches the maximum supply voltage (Vsup) at 5.5V. Normal operation requires a supply voltage (Vsup) above 2V. Despite its superior flexibility, it relies on 2 circuits to achieve it. In light of its reliable performance, this T flip flop is well suited for TR. It runs on 3.3Vvolts of power. As a result of its output current of 12mA, it is very flexible in terms of design.

SN74LV74APWT Features

Tape & Reel (TR) package
74LV series
14 pins
3.3V power supplies

SN74LV74APWT Applications

There are a lot of Texas Instruments SN74LV74APWT Flip Flops applications.

• Common Clocks
• Registers
• Power down protection
• Guaranteed simultaneous switching noise level
• CMOS Process
• Event Detectors
• Storage Registers
• Data transfer
• Automotive
• Balanced Propagation Delays