SN74LVC139APWR

SN74LVC139APWR Overview

This is a relatively small item of digital switch that is included in the 16-TSSOP (0.173, 4.40mm Width) in order to save space on the board.As a result, it is packaged in the way of Tape & Reel (TR).In terms of mounting, digital switch ic uses the Surface Mount method .A digital IC Decoder/Demultiplexer is used as the analog component of the multiplexers.If the operating temperature is maintained at -40°C~85°C, turn signal switch will not be susceptible to external factors.The turn signal switch is designed for use with a 1.65V~3.6V supply voltage, which gives it a lot of flexibility.Since they are members of the 74LVC series, they can be used in a wide variety of applications.Its basic configuration includes terminations in the 16 range.There is a base part number 74LVC139 that can be used to locate signal switch's related components as well.In this case, 1.8V is the voltage supplied to the multiplexer's system.There are 16 component pins in this turn signal switch.Using the point GULL WING as an end point of conductors, it is used to determine the terminus of a conductor.Single is employed as its supply type.This multiplexer ic is configured with 16 pins.The mount is in Surface Mount.I would like to refer to the logic switch as a member of the LVC/LCX/Z family.As a result, signal multiplexer provides 4 bits.In order to prevent unnecessary failures, it is recommended that the minimal supply voltage (Vsup) be kept at 1.65V.The maximal supply voltage (Vsup) should be kept at 3.6V to avoid some unnecessary failures.During mux switch's normal operation, 3.3V is provided with a power supply.As a result, the turn signal switch consists of 4 outputs.The digital switch ic is a part of an electronic system classified as Decoder/Drivers.Not being affected by the external factors, consumes 10μA current of multiplexer ic.TR is used to package the switches.In order for the digitalswitch to function normally, it has 2 circuits.

SN74LVC139APWR Features

Supplied in the 16-TSSOP (0.173, 4.40mm Width) package
Adopting a supply type of Single
Power supplies of 3.3V

SN74LVC139APWR Applications

There are a lot of Texas Instruments SN74LVC139APWR Signal Switches / Multiplexers / Decoders applications.

• Communication system
• Make full adder
• Seven segment displays
• Enabling different rows of memory depending on address in memory chips
• Paper plants
• Data communication
• Speed synchronization of multiple motors in industries
• Data collection system
• Signal router
• Enabling block of memory depending on address in memory chips