SN74LVC1G79DBVTG4

SN74LVC1G79DBVTG4 Overview

As a result, it is packaged as SC-74A, SOT-753. A package named Tape & Reel (TR)includes it. As configured, the output uses Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates at 1.65V~5.5Vvolts. In the operating environment, the temperature is -40°C~125°C TA. D-Typeis the type of this D latch. FPGAs belonging to the 74LVCseries contain this type of chip. You should not exceed 160MHzin the output frequency of the device. There is a consumption of 10μAof quiescent energy. It has been determined that there have been 5 terminations. You can search similar parts based on 74LVC1G79. It is powered by a voltage of 1.8V . The input capacitance of this T flip flop is 4pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. The electronic device belongs to the LVC/LCX/Zfamily. There is an electronic part that is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 5. This device has Positive Edgeas its clock edge trigger type. There is a FF/Latchesbase part number assigned to the RS flip flops. This flip flop is designed with 1 Bits. Due to its superior flexibility, it uses 1 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. It operates from 3.3V power supplies. The output current of 32mA makes it feature maximum design flexibility.

SN74LVC1G79DBVTG4 Features

Tape & Reel (TR) package
74LVC series
5 pins
1 Bits
3.3V power supplies

SN74LVC1G79DBVTG4 Applications

There are a lot of Texas Instruments SN74LVC1G79DBVTG4 Flip Flops applications.

• EMI reduction circuitry
• Control circuits
• Buffered Clock
• Frequency Divider circuits
• Guaranteed simultaneous switching noise level
• Single Down Count-Control Line
• Differential Individual
• Communications
• Modulo – n – counter
• Registers