SN74LVC1G79DCKTG4

SN74LVC1G79DCKTG4 Overview

In the form of 5-TSSOP, SC-70-5, SOT-353, it has been packaged. The package Tape & Reel (TR)contains it. Currently, the output is configured to use Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. It is mounted in the way of Surface Mount. A voltage of 1.65V~5.5Vis required for its operation. The operating temperature is -40°C~125°C TA. This D latch has the type D-Type. FPGAs belonging to the 74LVCseries contain this type of chip. You should not exceed 160MHzin the output frequency of the device. It consumes 10μA of quiescent current without being affected by external factors. There have been 5 terminations. You can search similar parts based on 74LVC1G79. A voltage of 1.8V is used as the power supply for this D latch. JK flip flop input capacitance is 4pF farads. It belongs to the family of electronic devices known as LVC/LCX/Z. The electronic part is mounted in the way of Surface Mount. Basically, it is designed with a set of 5 pins. The clock edge trigger type for this device is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. The flip flop is designed with 1bits. The superior flexibility of this circuit is achieved by using 1 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. An electrical current of 3.3V volts is applied to it. Its output current of 32mAallows for maximum design flexibility.

SN74LVC1G79DCKTG4 Features

Tape & Reel (TR) package
74LVC series
5 pins
1 Bits
3.3V power supplies

SN74LVC1G79DCKTG4 Applications

There are a lot of Texas Instruments SN74LVC1G79DCKTG4 Flip Flops applications.

• Balanced 24 mA output drivers
• Asynchronous counter
• Computing
• Parallel data storage
• Common Clocks
• Single Down Count-Control Line
• Guaranteed simultaneous switching noise level
• Frequency division
• Frequency Divider circuits
• Frequency Dividers