SN74LVC1G79DRLR

SN74LVC1G79DRLR Overview

The package is in the form of SOT-553. D flip flop is included in the Tape & Reel (TR)package. Non-Invertedis the output configured for it. There is a trigger configured with Positive Edge. Surface Mountis in the way of this electric part. A supply voltage of 1.65V~5.5V is required for operation. It is operating at -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. The 74LVCseries comprises this type of FPGA. A frequency of 160MHzshould be the maximum output frequency. The number of terminations is 5. If you search by 74LVC1G79, you will find similar parts. A voltage of 1.8V is used as the power supply for this D latch. A 4pFfarad input capacitance is provided by this T flip flop. In this case, the D flip flop belongs to the LVC/LCX/Zfamily. Electronic part Surface Mountis mounted in the way. Basically, it is designed with a set of 5 pins. In this device, the clock edge trigger type is Positive Edge. This RS flip flops is a part number FF/Latches. An electronic part designed with 1bits is used in this application. 1 circuits are used to achieve its superior flexibility. This D flip flop is well suited for TR based on its reliable performance. It operates from 3.3V power supplies. The 32mA output current allows it to be designed with the greatest amount of flexibility. In terms of quiescent current, it consumes 10μA .

SN74LVC1G79DRLR Features

Tape & Reel (TR) package
74LVC series
5 pins
1 Bits
3.3V power supplies

SN74LVC1G79DRLR Applications

There are a lot of Texas Instruments SN74LVC1G79DRLR Flip Flops applications.

• Memory
• Bounce elimination switch
• 2 – Bit synchronous counter
• Cold spare funcion
• High Performance Logic for test systems
• Set-reset capability
• ATE
• Shift registers
• Circuit Design
• Parallel data storage