SN74LVC257ADBRG4

SN74LVC257ADBRG4 Overview

This is a relatively small item of digital switch that is included in the SSOP in order to save space on the board.Tape & Reel (TR) represents its packaging.Among its basic configurations are 16 terminations.In this case, 3.3V is the voltage supplied to the multiplexer's system.This turn signal switch contains 16 component pins.GULL WING represents the end of conductors.There is a type of supply Single that is employed in this case.It is configured with 16 pins.Surface Mount is the way it is mounted.The logic switch belongs to the family of LVC/LCX/Z.In the signal multiplexer, there are 2 bits available.There is a power supply provided for the mux switch's normal operation of 3.3V.In this multiplexer, there is a total of 8 inputs.Currently, the switches is packaged in accordance with the TR method.A voltage level can be inserted into the 2 input lines of multiplexers.A signal source is provided by 1 output lines.For transmission, there are 4 channels in the turn signal switch's circuit.Signal switchs at temperatures up to 85°C are acceptable.Maintaining a minimum operating temperature of the multiplexer of -40°C is recommended.It is specified that the signal switches should operate at 3.6V as its maximum supply voltage.In accordance with the applicable device specification, the digital swith must operate at a minimum supply voltage of 1.65V.

SN74LVC257ADBRG4 Features

Supplied in the SSOP package
Adopting a supply type of Single
Power supplies of 3.3V
2 input lines
1 output lines

SN74LVC257ADBRG4 Applications

There are a lot of Texas Instruments SN74LVC257ADBRG4 Signal Switches / Multiplexers / Decoders applications.

• Data-routing applications
• Code conversion
• CPU memory location identification
• Data distribution
• Relay
• Telephone network
• Microprocessor input/output systems
• Data bus control
• Arithmetic Logic Units
• Metal detectors