SN74LVC2G74DCUT

SN74LVC2G74DCUT Overview

8-VFSOP (0.091, 2.30mm Width)is the way it is packaged. It is included in the package Tape & Reel (TR). The output it is configured with uses Differential. In the configuration of the trigger, Positive Edgeis used. In this case, the electronic component is mounted in the way of Surface Mount. Powered by a 1.65V~5.5Vvolt supply, it operates as follows. In this case, the operating temperature is -40°C~125°C TA. It belongs to the type D-Typeof flip flops. JK flip flop belongs to the 74LVCseries of FPGAs. Its output frequency should not exceed 140MHz Hz. This process consumes 10μA quiescents. A total of 8terminations have been recorded. The 74LVC2G74 family contains this object. An input voltage of 1.8Vpowers the D latch. A 5pFfarad input capacitance is provided by this T flip flop. LVC/LCX/Zis the family of this D flip flop. There is an electronic component mounted in the way of Surface Mount. The electronic flip flop is designed with pins 8. Its clock edge trigger type is Positive Edge. This device is part of the FF/Latchesbase part number family. The design is based on 1bits. Vsup reaches its maximum value at 5.5V. Despite its superior flexibility, it relies on 1 circuits to achieve it. Considering its reliability, this T flip flop is well suited for TR. If high efficiency is to be achieved, the supply voltage should be maintained at 3.3V. It offers maximum design flexibility with its output current of 32mA. 2 gates are contained in its basic building block.

SN74LVC2G74DCUT Features

Tape & Reel (TR) package
74LVC series
8 pins
1 Bits
2 gates

SN74LVC2G74DCUT Applications

There are a lot of Texas Instruments SN74LVC2G74DCUT Flip Flops applications.

• Buffer registers
• 2 – Bit synchronous counter
• Bounce elimination switch
• Registers
• Convert a momentary switch to a toggle switch
• Instrumentation
• Data transfer
• Shift registers
• Circuit Design
• Storage registers